H3C XE 200 IP, Руководство по эксплуатации

Страница: 330 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 7 SNMP Configuration
7-10
Table 7-16 Set the aging time of trap packets
Operation Command
Set the aging time of trap packets snmp-agent trap life seconds
Restore the default trap packets aging time undo snmp-agent trap life
The range of seconds is from 1 to 2592000, with the default value as 120 seconds.
# Set the aging time of trap packets to 60 seconds.
[XE] snmp-agent trap life 60
7.3 Displaying and Debugging SNMP
Execute the display commands in any view to display the running information of the
SNMP configured and verify the configuration.
Use the debugging command to enable debugging for SNMP in user view.
Table 7-17 Display and debug SNMP
Operation Command
Display the version enabled by SNMP display snmp-agent sys-info version
Display the statistics of SNMP packets display snmp-agent statistics
Display the engine ID of the current
device
display snmp-agent { local-engineid }
Display the group name, security mode,
status of views, and storage modes of
groups
display snmp-agent group
[ group-name ]
Display all the SNMP user names in a
group user name list
display snmp-agent usm-user
[ engineid engineid | username
user-name | group group-name ] *
Display the community name of the
current configuration display snmp-agent community
[ read | write ]*
Display the MIB view of the current
configuration
display snmp-agent mib-view
[ exclude | include | viewname
view-name ]
Display the character string of system
maintenance contact
display snmp-agent sys-info contact
Display the character string of system
location
display snmp-agent sys-info location
Enable debugging for SNMP
debugging snmp-agent { header |
packets | trap | process }