H3C XE 200 IP, Руководство по эксплуатации

Страница: 45 / 514

Operation Manual – Process Server Configuration
H3C XE 200/2000 IP PBX
Chapter 1 Process Server Overview
1-1
Chapter 1 Process Server Overview
1.1 Introduction to Process Server
The H3C XE 200/2000 IP PBX (hereinafter referred to as XE IP PBX) supports both
session initiation protocol (SIP) and H.323 protocol, and thus is suitable for complex
networks deployed with both SIP and H.323 devices.
An XE IP PBX can serve as a location server (LS), a process server (PS) and/or a
media server. This module mainly describes how to configure an XE IP PBX functioning
as a PS.
A PS provides the function of an H.323 gatekeeper and/or a SIP Server, depending on
your configuration. Figure 1-1 shows the architecture of the XE IP PBX.
Figure 1-1 Architecture of the XE IP PBXs
Configure an XE IP PBX as follows depending on the network where the IP PBX is
deployed:
z
In a SIP network, enable SIP Server on the PS, and set gateway device type to
SIP user agent (UA) on the LS.
z
In an H.323 network, enable gatekeeper on the PS, and set gateway device type
to H.323 on the LS.
z
In a complex network deployed with both SIP and H.323 devices, enable SIP
server and gatekeeper on the PS, and set the proper gateway device type on the
LS.
For the configuration of LS, refer to the “LS Configuration” part of this manual.