H3C XE 200 IP, Руководство по эксплуатации

Страница: 239 / 514

Operation Manual – Feature
H3C XE 200/2000 IP PBX
Chapter 2 Backup and Load Sharing
2-13
Perform the following configuration in LS-GW view.
Table 2-13 Configure the number of subscriber lines accommodated by the gateway
Operation Command
Configure the number of subscriber lines
accommodated by the gateway
subsline-sum number
Restore the default undo subsline-sum
By default, each gateway can accommodate up to four subscriber lines.
IV. Configuring the backup gatekeeper port number in H.323
Registration_Confirm messages
Refer to Configuring the backup gatekeeper port number in H.323 registration
responses .
V. Configuring the backup SIP Server port number in SIP registration
response messages
Refer to Configuring the backup SIP Server port number in SIP registration responses .
2.3 Backup and Load Sharing Configuration Example
2.3.1 LS Backup Example
I. Network requirements
z
XE IP PBX 1 serves as the PS (Process Server), XE IP PBX 2 serves as the
primary LS (Location Server 1), and XE IP PBX 3 serves as the secondary LS
(Location Server 2).
z
Configure device information and gateway information of the PS on Location
Server 1 and Location Server 2.
z
On the PS, designate Location Server 1 (ID=0) as the primary LS, and Location
Server 2 (ID=1) as secondary LS.
z
On the gateway, designate Process Server as the gatekeeper.