H3C XE 200 IP, Руководство по эксплуатации

Страница: 327 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 7 SNMP Configuration
7-7
"enterprise device information" of the company. It can be either the IP
address, MAC address or the user-defined hexadecimal digit string.
Perform the following configuration in system view.
Table 7-9 Set the engine ID of a local device
Operation Command
Set the engine ID of a device snmp-agent local-engineid engineid
Restore the engine ID of a device .
undo snmp-agent local-engineid
7.2.9 Setting the Address of the Trap Target Host
Perform the following configuration in system view.
Table 7-10 Set/delete the address of the destination host for Trap packets
Operation Command
Set the address of the trap
target host
snmp-agent target-host trap address
udp-domain X.X.X.X [ udp-port port-number ]
params securityname security-string [ v1 | v2c | v3
{ authentication | privacy } ]
Delete the address of the
trap target host undo snmp-agent target-host X.X.X.X
securityname security-string
# Enable the trap packet destined for the address 202.38.160.6, using the community
name public.
[XE] snmp-agent target-host trap address udp-domain 202.38.160.6 udp-port 5000
params securityname public
7.2.10 Setting the Location of XE IP PBX
The location of XE IP PBX is a management variable of the system group in MIB and
represents the location of a managed device.
Perform the following configuration in system view.
Table 7-11 Set the location information of XE IP PBX
Operation Command
Set the location of XE IP PBX
snmp-agent sys-info location
sysLocation
Restore the location of XE IP PBX to
default value
undo snmp-agent sys-info location