H3C XE 200 IP, Руководство по эксплуатации

Страница: 87 / 514

Operation Manual – Location Server Configuration
H3C XE 200/2000 IP PBX
Chapter 1 Location Server Configuration
1-3
whether authentication is enabled, authentication password, manufacturer information,
whether multiplexing is enabled, registering cycle, and so on.
Note:
If calling number hiding is configured on a gateway acting as a SIP user agent, services
related with the calling number may not work.
z
Query gateway information
To query the gateway information, you can provide the identifier of the gateway; also
you can list information about the gateway by device type.
z
Configuring office device information
You need to configure the information of an office device configured on an LS, which
includes: office device identifier, device type, device status, IP address and port number,
static route number, default route priority, and whether multiplexing is enabled.
z
Querying information about office device
To query the office device information, you can provide the identifier of the office device;
also you can list information about the office device by device type.
z
Configuring office group information
You need to configure the information of an office group on an LS, including office group
identifier, area code, domain to which the office group belongs, static route, number
substitution table, and so on.
z
Querying information about office group
You can query the information of an office group by the office group identifier.
z
Querying devices corresponding to a number
You can query the devices that support a specific number.
z
Enabling/disabling LS functions
You can enable/disable an LS to meet different network requirements of PS and LS. If
the PS function and LS function are enabled on the same XE IP PBX, you must enable
the LS function. If the PS function and the LS function are enabled on different XE IP
PBXs, you must disable LS function on the XE IP PBX serving as PS. If LS function was
enabled on the PS IP PBX and now you have disabled it, all the dynamic information
record will be lost on the LS, and new registrations and calls will fail, but the calls that
have already been set up will not be affected, and the LS function should be enabled on
the XE IP PBX serving as the LS.
z
Specifying call processing method