H3C XE 200 IP, Руководство по эксплуатации

Страница: 426 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 12 ONLY Service
12-1
Chapter 12 ONLY Service
12.1 Overview
The one number link you (ONLY) service can be used to assign an ID, which uniquely
identifies a subscriber. Some or all of the subscriber’s numbers can be bound with the
subscriber ID. When a call is made to the subscriber ID, telephone sets bound to it will
ring in the order of priority level from high to low that the subscriber’s numbers are given.
Those telephone sets whose numbers have the same priority level will ring in a
randomly determined order if the function of random number selection is enabled, and
will ring simultaneously if that function is not enabled. The subscriber can pick up any
phone to start the conversation. Meanwhile, other phones stop ringing.
One subscriber ID, a string of up to 31 characters, can be bound with 5 numbers at
most.
At most 2000 subscriber IDs can be configured for the XE 2000, and 200 for the XE
200.
When the ONLY service is enabled, a subscriber can place a call by dialing the callee’s
ID instead of complete numbers.
12.2 ONLY Service Configuration
12.2.1 Configuration Procedure
Table 12-1 Configure ONLY service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Create a subscriber ID and
enter ONLY service view.
only subscriber-id Required
Bind a subscriber’s number with
the ID.
tel-number number
Required