H3C XE 200 IP, Руководство по эксплуатации

Страница: 290 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 4 System Maintenance and Management
4-8
channel-name : Specifies a channel by its name.
Each channel has a default record with a module name of default . For different
channels, the record may have different default settings for log, trap, and debugging
information. If a module has no explicit configuration record in the channel, the default
configuration record is used.
Caution:
If there are multiple Telnet or dumb terminal users logging onto the system at the same
time, they share some configuration parameters, including filtering by module,
language selection, and severity threshold. The changes that one user made on these
parameters are also shown on other user terminals.
V. Generating information
At present, the information center of the XE IP PBX can send information in six
directions:
z
To a local console through the console port.
z
To a remote Telnet terminal or a dumb terminal. This helps remote maintenance.
z
To a log buffer. You can configure a log buffer with appropriate size on the XE IP
PBX.
z
To the log host. Information is saved there in files for query.
z
To a trap buffer. You may allocate a trap buffer with appropriate size on the XE IP
PBX.
z
To an SNMP agent.
The information center sorts, filters, and then sends information into different channels.
By associating a channel with an output direction and setting filtering conditions, you
can perform information filtering and redirection.
Perform the following configuration in system view.
Table 4-10 Information output
Operation Command
Configure to send information to the
console info-center console channel
{ channel-number | channel-name }
Configure to send information to the
Telnet terminal or dumb terminal info-center monitor channel
{ channel-number | channel-name }
Configure to send information to the
SNMP agent info-center snmp channel
{ channel-number | channel-name }