H3C XE 200 IP, Руководство по эксплуатации

Страница: 291 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 4 System Maintenance and Management
4-9
Operation Command
Configure the size of the log buffer and
to send information to the log buffer
info-center logbuffer [ channel
{ channel-number | channel-name } |
size buffersize ] *
Disable the log buffer or restore the
default value undo info-center logbuffer [ channel |
size ]
Configure to send information to the log
host and set related parameters
info-center loghost X.X.X.X [ channel
{ channel-number | channel-name } |
facility local-number | language
{ chinese | english } ] *
Disable sending information to the log
host
undo info-center loghost X.X.X.X
Configure the size of the trap buffer and
to send information to the trap buffer
info-center trapbuffer [ channel
{ channel-number | channel-name } |
size buffersize ] *
Disable the trap buffer or restore the
default value undo info-center trapbuffer [ channel
| size ]
The system allocates a default channel to every output direction as shown in the Table
4-11 :
Table 4-11 Default information output channels allocated to each direction
Output direction Information channel No. Default channel name
Console 0 console
Monitor terminal 1 monitor
Log host 2 loghost
Trap buffer 3 trapbuffer
Log buffer 4 logbuffer
SNMP 5 snmpagent
Note:
Settings of the six output directions are independent and you need to enable the
information center to validate them.
VI. Configuring the source address in log information
Perform the following configuration in system view.