H3C XE 200 IP, Руководство по эксплуатации

Страница: 77 / 514

Operation Manual – Process Server Configuration
H3C XE 200/2000 IP PBX
Chapter 5 SIP Server Configuration
5-5
Table 5-10 Configure the SIP signaling port of the SIP proxy server
Operation Command
Configure the SIP signaling port of the
SIP proxy server
ip-config port sip-port-number
Restore the default SIP signaling port of
the SIP proxy server
undo sip-config
The default SIP signaling port of the SIP proxy server is 5060.
II. Configuring the wait-connect timer and the ringing-time timer
The wait-connect timer specifies the maximum duration that the calling party waits for
the called party to pick up the phone. If no answer is received upon expiration of the
timer, XE IP PBX disconnects the call.
The ringing-time timer specifies the maximum duration that the called party rings. If the
called user does not pick up the phone upon expiration of the timer, XE IP PBX
disconnects the call. This feature is available routed calls.
Perform the following configuration in PS view.
Table 5-11 Configure the wait-connect and ringing-time timers
Operation Command
Configure the maximum duration that
the calling party waits for the called party
to pick up the phone
timeout caller wait-connect time
Restore the default maximum duration
that the calling party waits for the called
party to pick up the phone
undo timeout caller wait-connect
Configure the timeout interval for each
called party
timeout callee ringing-time time
Restore the default timeout interval for
each called party
undo timeout callee ringing-time
By default, the maximum duration that the calling party waits for the called party to pick
up the phone is 90 seconds and the timeout interval for each called party is 40 seconds.
Note:
The maximum duration configured through the timeout caller command does not take
effect on a subscriber number bound with multiple phone sets.