H3C XE 200 IP, Руководство по эксплуатации

Страница: 28 / 514

Operation Manual – Basic Configuration
H3C XE 200/2000 IP PBX
Chapter 2 Command Line Interface for Configuration
2-18
Keys or commands Function
ESC_< Set the cursor’s location to the beginning of the clipboard
ESC_> Set the cursor’s location to the end of the clipboard
2.3.2 Usage of the Hot Keys
z
You can press a hot key combination wherever you are allowed to enter a
command. Then the system displays the corresponding command as if you have
entered the complete command.
z
If you have entered part of a command without pressing <Enter>, you can delete
the input characters and enter a complete command simply by pressing the hot
key for this new command.
z
Similar to executing a command, after a shortcut key is executed, its
corresponding command prototype is retained in the history command buffer and
log for retrieving and locating problem.
Note:
The functionality of a hot key may be the user terminal dependent, for example, the hot
key assigned from the terminal may conflict with the one on XE IP PBX. In this case, the
application on the terminal responds to the hot key press.
Perform the following configuration in system view.
Table 2-8 Define hot keys
Operation Command
Define a hot key.
hotkey { CTRL_G | CTRL_L | CTRL_O
| CTRL_T | CTRL_U } command_text
Restore the default values in the system.
undo hotkey { CTRL_G | CTRL_L |
CTRL_O | CTRL_T | CTRL_U }
By default, the system assigns defaults to the hot keys of CTRL_G, CTRL_L and
CTRL_O as follows:
CTRL_G: display current-configuration
CTRL_L: display ip routing-table
CTRL_O: undo debugging all