Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 8 Modem Management Configuration
8-4
z
Specifying a Modem Script Triggered by an Event
z
Configuring the Answer Mode for the Modem
8.2.1 Configuring the Incoming and Outgoing Calls of the Modem
Perform the following configuration in user-interface view.
Table 8-3
Configure the incoming and outgoing access of the Modem
Operation
Command
Allow only incoming calls of the Modem
modem call-in
Allow both incoming and outgoing calls of the Modem
modem both
Inhibit both incoming and outgoing calls of the Modem
undo modem both
Inhibit incoming calls of the Modem
undo modem call-in
By default, the Modem is inhibited from both incoming and outgoing calls.
8.2.2 Configuring a Modem Script
Perform the following configuration in system view.
Table 8-4
Configure a Modem script
Operation
Command
Define a Modem script
script-string
script-name
script-content
Delete a Modem script
undo
script-string
script-name
For the format of script, refer to
Syntax of Modem script
.
8.2.3 Executing a Modem Script Manually
When necessary, you can use the
start-script
command to execute a specific Modem
script to manage the Modem connected to the port.
Perform the following configuration in user view.
Table 8-5
Execute a Modem script manually
Operation
Command
Execute a Modem script manually
start-script
script-name number
Содержание XE 200 IP
