H3C XE 200 IP, Руководство по эксплуатации

Страница: 455 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 20 MyRing Service
20-2
Step Expected result
Subscriber B dials the phone number
of subscriber A. The phone of subscriber A rings, and B
hears the customized ringback tone of A.
Subscriber A picks up the phone.
The XE IP PBX stops playing the
customized ringback tone and the
conversation starts.
20.2 MyRing Service Configuration
20.2.1 Basic Configurations of MyRing Service
Table 20-2 Basic configurations of the MyRing service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-GW view. gateway device-id —
Enter subscriber number
view. subscriber short-number
long-number
—
Enable/disable the
MyRing Service. srv-switch myring { on |
off }
Required
Enter MyRing view. myring —
Configure the default
customized ringback tone
for the subscriber.
default-ring media-id
Required
By default, the
customized ringback tone
is 1010.wav.
20.2.2 Configuring Caller Groups and Related Information
Table 20-3 Configure caller groups and related information
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-GW view. gateway device-id —
Enter subscriber number
view. subscriber short-number
long-number
—
Enter MyRing view. myring —
Create a caller group and
enter its caller group view. caller-group
caller-group-id
Required