H3C XE 200 IP, Руководство по эксплуатации

Страница: 92 / 514

Operation Manual – Location Server Configuration
H3C XE 200/2000 IP PBX
Chapter 1 Location Server Configuration
1-8
Note:
In the actual network configuration, the IDs for all gateway(s), PS(s) and office device(s)
should be different.
II. Configuring a heartbeat password
The LS listens to the keepalive status message periodically sent by the PS to learn the
PS’s keepalive status. To ensure a proper connection between the LS and the PS, the
heartbeat password of the LS must be identical to that of the PS.
Perform the following configuration in LS-PS view.
Table 1-8 Configure the heartbeat password
Operation Command
Configure the heartbeat password heartbeat password password
Restore the default heartbeat password
undo heartbeat password
1.3.8 Configuring a MS Registered with an LS
For configuration details, refer to the “Configuring MS Device Information in LS View”
part of module “Media Server Operation”.
1.3.9 Configuring a Gateway Registered with an LS
H.323 Gateway and SIP User Agent are both gateways, which connect to user phones
or PBXs and are responsible for the conversion between different signaling protocols
and media formats. The LS records information about these gateways for the PSs.
To configure gateways, you must create an LS-GW view first. You can perform the
following:
z
Adding a gateway or entering a gateway view
z
Configuring the type of a gateway
z
Specifying whether a gateway uses a dynamic IP
z
Configuring the IP address of a gateway
z
Configuring the port number of a gateway
z
Configuring the IPv4 address of the call signaling for a gateway
z
Configuring the call signaling port of a gateway
z
Configuring the status of a gateway
z
Configuring the transport layer protocol used by SIP UA
z
Configuring the default route number priority of a gateway
z
Configuring the static route number of a gateway