H3C XE 200 IP, Руководство по эксплуатации

Страница: 438 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 15 Callback-On-Busy Service
15-4
Operation Command Description
Enter LS-SRV view. service —
Enter call back view. cb —
Set the call back interval
(in minutes).
interval time-length
Optional, the default call back
interval is 1 minute.
Set the call back retry
times.
retry times
Optional
The default retry times is 10.
15.2.2 Enabling/Disabling Callback-On-Busy Service
Table 15-4 Enable/disable the callback-on-busy service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-GW view. gateway device-id —
Enter subscriber number view.
subscriber short-number
long-number
—
Enable/disable the
callback-on-busy service.
srv-switch cb { on | off } Required
15.3 Configuration Example
15.3.1 Configuration Requirements
Enable the callback-on-busy service for subscriber 8801 under GW01.
15.3.2 Network Diagram
Note:
Refer to the network diagram in Network Diagram .