H3C XE 200 IP, Руководство по эксплуатации

Страница: 256 / 514

Operation Manual – Feature
H3C XE 200/2000 IP PBX
Chapter 4 VoIP RADIUS Accounting Configuration
4-3
Table 4-2 Configure RADIUS accounting server
Operation Command
Configure RADIUS accounting server
radius server { radius-server-name |
radius-server-ip } [ accounting-port
accounting-port ]
Delete the specified RADIUS accounting
server
undo radius server
4.3.3 Configuring Shared Key for RADIUS Accounting Server
The shared access password configured on the XE IP PBX must be the same as
configured on the RADIUS accounting server.
Perform the following configuration in system view.
Table 4-3 Configure the shared access password for the RADIUS accounting server
Operation Command
Configure the shared access password
of the RADIUS accounting server
radius shared-key pwd
Delete the shared access password of
the RADIUS accounting server
undo radius shared-key
4.3.4 Configuring Authentication Request Retry Times
The system sends an authentication request to the RADIUS server. If the system does
not receive a response before the specified timeout timer expires, it needs to retransmit
the authentication request. The user can set a limit on the request retry times. Thus,
when the request retry attempts exceed the allowed retry times, the system will assume
that the server has failed and will set its state to the FAILED state.
Perform the following configuration in system view.
Table 4-4 Configure authentication request retry times
Operation Command
Configure the allowed authentication
request retry times.
radius retry times
Restore the default authentication
request retry times.
undo radius retry
By default, the system retries to send an authentication request to a RADIUS Server 3
times. You can set 1 to 254 retry times.