H3C XE 200 IP, Руководство по эксплуатации

Страница: 304 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 5 File System Management
5-7
[LocalFile] command to upload the specified file to the XE IP PBX. The file name must
be the same with the configuration file name of the XE IP PBX (config.cfg).
<ftp> get config.cfg config.bak
200 Port command okay.
150 Server okay , now transmit file.
226 file transmit success.
ftp: 735 bytes received in 0.06Seconds 12.25Kbytes/sec.
By making the XE IP PBX as FTP client, you can transfer the configuration file in the XE
IP PBX to the server.
5.3 FTP Configuration
5.3.1 Introduction to FTP
FTP is an application layer protocol in the TCP/IP protocol suite and provides file
transfer service between a local host and a remote host. The implementation of FTP
relies on the corresponding file system.
FTP services provided by system include:
z
FTP Server service. You can run the FTP client program to log into the XE IP PBX
to access the files in the XE IP PBX.
z
FTP Client service. You can establish a connection with XE IP PBX using terminal
emulation program or Telnet program, then input the FTP commands to establish
a connection with a remote FTP Server to access the files in the remote host.
The configuration of the FTP server includes:
z
Enabling FTP server.
z
Configuring the authentication and authorization of FTP server.
z
Configuring the operation parameters of FTP server.
z
Displaying and debugging the FTP server.
5.3.2 Enabling FTP Server
Only when the FTP server function is enabled, can the FTP client log into the server
and access the files in the remote host.
Perform the following configuration in system view.
Table 5-9 Enable/disable FTP server
Operation Command
Enable FTP server
ftp server enable
Disable FTP server undo ftp server