H3C XE 200 IP, Руководство по эксплуатации

Страница: 196 / 514

Operation Manual – Feature
H3C XE 200/2000 IP PBX
Chapter 1 Number Substitution
1-12
Table 1-14 Bind/unbind a substitute table
Operation Command
Bind a substitute table substitute table-identifier
Unbind the specified or all substitute
tables
undo substitute { table-identifier | all }
By default, no substitute table is bound.
VIII. Configuring inheritance of number substitution
For the XE IP PBX, number substitution has two modes: inheritance and
non-inheritance.
In non-inheritance mode, the system performs only one substitution operation in each
number substitution.
In inheritance mode, the system may perform multiple substitution operations in each
number substitution. In this case, after a number is substituted according to the
matched rule, its substitute will be substituted again if another matched rule is found.
This substitution operation continues until no match is found.
Perform the following configuration in LS view.
Table 1-15 Enable/disable inheritance-mode of number substitution
Operation Command
Enable inheritance mode policy substitute-inherit enable
Enable non-inheritance mode policy substitute-inherit disable
By default, inheritance mode is enabled.
1.5 Displaying Information about Number Substitution
Perform the following configuration in any view.
Table 1-16 Display information about number substitution
Operation Command
Display details about a specific or all
substitute tables display location-server
number-substitute
{ table-identifier | all }
Display all globally bound substitute
tables
display location-server substitute
Display information about the device to
which the specified number belongs
display subscriber long-number
[ nation-num + region-num ]