H3C XE 200 IP, Руководство по эксплуатации

Страница: 390 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 6 Abbreviated Dialing Service
6-4
6.2 Abbreviated Dialing Service Configuration
6.2.1 Configuration Procedure
Table 6-6 Configure abbreviated dialing service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-GW view. gateway device-id Required
Enter subscriber number
view. subscriber short-number
long-number
Required
Enter abbreviated dialing
service view.
adi —
Add an item to the
abbreviated dialing table. adi ab-number
long-number
Required
Exit the abbreviated
dialing service view
quit —
Enable/disable the
abbreviated dialing
service.
srv-switch adi { on | off }
Required
The abbreviated dialing
service is enabled by
default.
6.3 Configuration Example
6.3.1 Configuration Requirements
Configure two abbreviated dialing numbers for subscriber 8801 under GW01: number
22 representing subscriber 8802 and 33 representing subscriber 8803.
6.3.2 Network Diagram
Note:
Refer to the network diagram in Network Diagram .