H3C XE 200 IP, Руководство по эксплуатации

Страница: 420 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 10 Call Forwarding Services
10-17
II. Checking the existence of a target number on the telephone set
The following table describes how to verify the CFNR target number, that is, to check
whether a specified number is set as the CFNR target number on the telephone set.
Table 10-19 Check specified CFNR target number on the telephone set
Step Expected result
Pick up the phone. The subscriber can hear the dial tone.
Dial *#41*.
If the specified number is set as the target number, the
subscriber can hear the ringback tone or the voice
prompt “You have already activated the call forwarding
no reply service. Your forward number is
XXXX. ” ( XXXX
is the CFNR number the subscriber sets . )
If not, the subscriber will hear the busy tone or the voice
prompt “Sorry, you have no forward number.”
Hang up the phone. —
III. Deleting all CFNR forwarding numbers on the telephone set
The following table describes how to delete the CFNR forwarding number.
Table 10-20 Delete all CFNR forwarding numbers on the telephone set
Step Expected result
Pick up the phone. The subscriber can hear the dial tone.
Dial #41#.
If target numbers are deleted, the subscriber can hear
the ringback tone or the voice prompt “You have
deactivated the service.”
If no target number is available for deletion, the
subscriber will hear the busy tone or the voice prompt
“Sorry, your attempt to deactivate the service was
unsuccessful.”
Hang up the phone. —
Caution:
Be cautious about your deletion, for all the CFNR forwarding numbers will be deleted by
the operation.