H3C XE 200 IP, Руководство по эксплуатации

Страница: 430 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 13 Time Limit Call Service
13-2
13.2 Time Limit Call Service Configuration
13.2.1 Configuration Procedure
Table 13-2 Configure time limit call service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Set the default call
duration. default-limit-call-time
default-limited-time
Optional
Enter LS-GW view. gateway device-id Required
Enter subscriber number
view. subscriber short-number
long-number
Required
Enter time limit call
service view.
limited-time-call —
Set the call duration limit
for the subscriber. limit-call-time
limited-time
Optional
The default duration limit
is adopted when this
argument is not set.
Exit time limit call service
view.
quit —
Enable/disable the time
limit call service.
srv-switch
limited-time-call
{ on |
off }
Required
13.3 Configuration Example
13.3.1 Configuration Requirements
Enable the time limit call service for subscriber 8801 under GW01, with the call duration
limit being 360 seconds.
13.3.2 Network Diagram
Note:
Refer to the network diagram in Network Diagram .