H3C XE 200 IP, Руководство по эксплуатации

Страница: 462 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 22 Automatic Operator Service
22-2
3) Configure the automatic operator number and its basic information. Refer to
Configuration Procedure for details.
4) Use the automatic operator service
II. Use automatic operator service
Table 22-1 Use the automatic operator service
Step Expected result
The subscriber picks up the phone. The subscriber hears the dial tone.
The subscriber dials the automatic
operator number.
If the automatic operator number does
not exist, the subscriber hears the voice
prompt “Sorry, the subscriber you dialed
does not exist.”
If the automatic operator number is
configured, the subscriber hears the
administrator-configured the voice
prompt, prompting for two-stage dialing.
The subscriber dials the short number +
# following the voice prompt.
The subscriber hears the voice prompt
“The call is being processed. Please
hold on.” and then the waiting tone. The
called phone rings.
22.2 Automatic Operator Service Configuration
22.2.1 Configuration Procedure
Table 22-2 Configure the basic information of the automatic operator service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-SRV view. service —
Configure the automatic
operator number.
auto-operator
number-of-auto-operator
Required
Configure the access
voice prompt of the
automatic operator
service.
prompt media-id Required
Configure the operational
code/phone number
bindings.
extension
corresponding-number
corresponding-number-of
-extension
Required