H3C XE 200 IP, Руководство по эксплуатации

Страница: 99 / 514

Operation Manual – Location Server Configuration
H3C XE 200/2000 IP PBX
Chapter 1 Location Server Configuration
1-15
Note:
Authentication is currently available to SIP-supported devices. As for H.323 devices, it
is a reserved parameter.
Perform the following configuration in LS-GW view.
Table 1-20 Specify whether a gateway needs to perform authentication
Operation Command
Specify whether a gateway needs to
perform authentication
authentication { disable | enable }
Restore the default setting undo authentication
XIII. Configuring the authentication password of a gateway
After you have configured authentication passwords on an LS and a gateway
respectively, the PS will check whether the authentication password of the gateway is
identical to that recorded on the LS when the gateway performs registration and
initiates a call, so as to ensure the validity of the gateway identification.
Note:
Authentication is currently available to SIP-supported devices only. As for H.323
devices, it is a reserved parameter. An authentication password is valid only when
authentication is enabled, although it is configurable when authentication is disabled.
Perform the following configuration in LS-GW view.
Table 1-21 Configure the authentication password of a gateway
Operation Command
Configure the authentication password of a gateway password password
Restore the default authentication password undo password