H3C XE 200 IP, Руководство по эксплуатации

Страница: 34 / 514

Operation Manual – Basic Configuration
H3C XE 200/2000 IP PBX
Chapter 3 Basic Configuration
3-4
Table 3-8 Set command privilege
Operation Command
Set command privilege in a view
command - privilege level level view
view command-key
Reset the default command privilege
undo command - privilege view view
command-key
Table 3-9 Default command privilege
Code Level Command
0 Visit ping , tracert , telnet
1 Monitor display , debugging
2 System
All configuration commands except for those of
manage level
3 Manage
File System commands, FTP commands, and TFTP
commands
Note:
Each command belongs to its default view and has corresponding privilege; therefore it
is not necessary to reset them.
IX. Displaying system status information
Use the display command to collect system status information, which can be classified
as follows:
z
Commands that display system configuration information
z
Commands that display the status of system operation
z
Commands that display system statistics
For the details of the display command of various protocols and interfaces, refer to
corresponding chapters. The table below lists some system-related display
commands.
Perform the following configuration in any view.