H3C XE 200 IP, Руководство по эксплуатации

Страница: 300 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 5 File System Management
5-3
Note:
Secure boot file is the last system boot resort. You can download it in the Boot ROM
menu and must name it secure.bin. However, you cannot modify this file or change the
type of another file to S. If you change the name of the secure boot file with the rename
command after the system boots, no secure boot file exists in Flash memory. To use
the secure boot file after that, you need to download it again.
You can also perform these operations in the Boot ROM menu, with reference to the
H3C XE 200/2000 IP PBX Installation Manual .
5.1.4 Storage Device Operation
Operations on the storage device mainly involves formatting.
Perform the following configuration in user view.
Table 5-4 Storage device operation
Operation Command
Format a storage device format device-name
5.1.5 File System Prompt Mode
You can use the file prompt command to modify the prompt mode of the current file
system.
Perform the following configuration in system view.
Table 5-5 Set the prompt mode of the file system
Operation Command
Set the prompt mode of the file system file prompt { alert | quiet }
5.1.6 Example of Using the File System
# Copy the file from flash:/sample.txt to flash:/backup/sample.txt.
Copy flash:/sample.txt to flash:/backup/sample.txt ? [Y/N]:y
100% complete
% Copyed file flash:/sample.txt flash:/backup/sample.txt ...Done..
# Display the file information under the current directory, where the file has been copied
to.
<XE> dir flash:/backup/