H3C XE 200 IP, Руководство по эксплуатации

Страница: 302 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 5 File System Management
5-5
Note:
The displayed format and saved format of the configuration file are the same.
III. Saving the current configuration
Via the command lines interface, you can modify the current configuration of the XE IP
PBX. In order to make the current configuration as the initial configuration at next
power-on of the XE IP PBX, you need to save the current configuration to the Flash with
the save or save-now command to form a configuration file.
Perform the following configuration in user view.
Table 5-7 Save the current configuration
Operation Command
Save the current configuration (confirmation is required) save
Save the current configuration without confirmation
save-now
Note:
You are recommended to save the configuration using the save or save-now
command before reboot, so that the XE IP PBX can keep exactly the same
configuration after reboot.
IV. Erasing the configuration files
You can use the reset saved-configuration command to erase the configuration file in
the Flash of the XE IP PBX. After the configuration file is erased, default configuration
parameters will be used for the initialization at the next power-on. The configuration file
in the storage device can be erased in the following cases:
z
XE IP PBX software update may cause the mismatch between the software and
the configuration file.
z
Configuration file is corrupt, for example, due to load of a wrong configuration file.
After erasing the configuration files, use the save command to save the current
configuration file as a new one.
Perform the following configuration in user view.