H3C XE 200 IP, Руководство по эксплуатации

Страница: 21 / 514

Operation Manual – Basic Configuration
H3C XE 200/2000 IP PBX
Chapter 2 Command Line Interface for Configuration
2-11
Note:
The command line prompt uses IP PBX name as prefix (which defaults to H3C), view
name as suffix, a pair of parentheses to denote the current view, a pair of point brackets
(“<>”) to denote user view, and a pair of square brackets (“[ ]”) to denote system view or
any other configuration views.
2.2.2 Command Line Online Help
CLI offers the following online help types:
z
Full help
z
Fuzzy help
To obtain the desired help information, you can:
1) Enter “?” in any views, and you will obtain all the commands in this view and their
simple descriptions as well. For example, <XE> ?.
2) Enter a command and a “?” separated by a space, <XE> display ?. for example. If
"?" is at the position of a keyword, all the keywords and their brief descriptions are
shown.
3) Enter a command and a “?” separated by a space. If "?" is at the position of a
parameter, descriptions of these parameters are shown. For example:
[XE] interface ethernet ?
<0-0> Slot number
[XE] interface ethernet 0?
/
[XE] interface ethernet 0/?
<0-1>
[XE] interface ethernet 0/0 ?
<cr>
<cr> here indicates that no parameter is at this position. In this case, the command is
repeated in the next command line and executed if <Enter> is input.
4) Enter a character string followed by a “?”. All the commands starting with this
string are displayed. For example:
<XE> d?
debugging delete dir display
5) Enter a command followed by a character string and “?”. All the keywords starting
with this string are listed. For example:
<XE> display h?
history-command hotkey