H3C XE 200 IP, Руководство по эксплуатации

Страница: 31 / 514

Operation Manual – Basic Configuration
H3C XE 200/2000 IP PBX
Chapter 3 Basic Configuration
3-1
Chapter 3 Basic Configuration
3.1 Basic Configuration of Comware
I. Entering and exiting system view
After the XE IP PBX is powered on and you log into the XE IP PBX via the CONSOLE
port, the system displays user view with the prompt <H3C>. You can perform the
following operation to enter and exit system view.
Table 3-1 Enter and exit system view
Operation Command
Enter system view from user view system-view
Returning to the view of an upper level quit
Return to user view return
Use the quit command to return to an upper level view. If you are in user view, you can
use this command to exit the system. You can also run the return command by
pressing <Ctrl+Z>.
II. Setting the name for an XE IP PBX
The name of an IP PBX appears in command prompt. You can change it if necessary.
Perform the following configuration in system view.
Table 3-2 Set the name of an XE IP PBX
Operation Command
Set the name of an XE IP PBX sysname sysname
III. Setting system clock
You must set system clock to the correct time in order to work with other devices
properly.
Perform the following configuration in user view.