Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 5 Outgoing Call Authority Control Service
5-4
Operation
Command
Description
Enter subscriber number
view.
subscriber short-number
long-number
Required
Enable/disable the
outgoing authority control
service.
srv-switch cba
{
on
|
off
}
Required
The outgoing authority
control service is enabled
by default.
5.3 Configuration Example
5.3.1 Configuration Requirements
z
Create a subscriber type t1001, which matches the regular expression 1001. That
is, all numbers beginning with 1001 belong to this type.
z
Create a subscriber type t1002, which matches the regular expression 1002. That
is, all numbers beginning with 1002 belong to this type.
z
Create a subscriber role r1001, which can call numbers of the t1001 type.
z
Create a subscriber role r1002, which can call numbers of the t1002 type.
z
Set subscriber 1000 as role r1001 and enable the outgoing call authority control
service for it.
Note:
In the above case, subscriber 1000 can make calls to any number except those begin
with 1002.
5.3.2 Configuration Procedure
1)
Configure basic parameters of the XE IP PBX.
2)
Configure gateway basic parameters.
Note:
Refer to
Configuration Example
for the basic parameter settings.
3)
Configure service parameters on the XE IP PBX.
# Configure subscriber types: t1001 and t1002.
[XE-ls]subscriber-type t1001
Содержание XE 200 IP
