Cisco WS-C3550-12G, Руководство пользователя

Страница: 83 / 436

4-23
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 4 Deploying the Cisco Catalyst Switch Manager
Enabling Communication Between Network Elements and Devices
Figure 4-5 Network Element Management window
Step 2 Specify the passwords and SNMP communities as follows:
a.
Select the Configuration tab on the Network Element Management window.
b. In the CLI Passwords section, specify the Telnet Password and Enable Password parameters as
follows:
–
Telnet Password—Password used to connect to the switch using the Telnet protocol.
– Enable Password—Password used to enter the enable mode on the switch.
All values entered in these text fields will be displayed as “*”.
Step 3 Specify the SNMP read and write community strings as follows:
a.
Select the SNMP Access tab on the Network Element Management window.
b. Enter the correct SNMP read/write community strings as follows:
–
SNMP Version—The version of the SNMP agent running on the switch. The version is one of
these values: SNMPv1, SNMPv2c, or SNMPv3.
The SNMPv3 value is not supported by the Catalyst switches.
–
SNMP v2c Read Community—The v2c community string used to read data from the agent.
– SNMP v2c Write Community—The v2c community string used to write data to the agent.