manualshive.com logo in svg

Cisco WS-C3550-12G, Руководство пользователя, Страница: 397 / 436

Поделиться
Скачать
Cisco WS-C3550-12G Скачать руководство пользователя страница 397

 

12-9

Cisco Catalyst Switch Manager User Guide

OL-4930-01

Chapter 12      Profile Management

Syslog Profile

Step 2

Select the Software and corresponding Syslog objects from the displayed lists on the left–hand side of 
the window if necessary.

Step 3

From the menu bar, choose Edit > Apply Profile and the name of the profile you want to apply.

The profile is applied and the Syslog attributes are changed to match that of the profile.

Step 4

Save the modified data by choosing File > Save or clicking the Save icon in the window tool bar as 
required.

Step 5

Close the window choosing File > Close or clicking the Close icon in the window tool bar as required.

The window closes.

Содержание WS-C3550-12G





















































































































































































































































































































































































































































Отзывы:

Нет отзывов