Cisco WS-C3550-12G, Руководство пользователя

Страница: 272 / 436

9-8
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 9 Software Management
Software Management Window
Cat OS Config File Tab
The following areas are available on the Cat OS Config File tab of the Software Management window:
•
Startup Configuration
• Backup/Restore Configuration
Startup Configuration
The Startup Configuration area provides the following information:
•
Startup Location—The location of the startup configuration file that was used the last time the
system was booted up. This attribute is read-only.
• Startup Last Changed—Indicates the timestamp of the most recent startup configuration file change.
• Config Mode—Cat OS configuration mode. The mode can be one of these values:
– binary—In binary config mode, any changes to the running configuration are automatically
written to NVRAM.
– text—In text file configuration mode, the changes are only written to DRAM.
• Text File Location—The location of the Cat OS text configuration file which can be either NVRAM
or a file in the FLASH file system.
•
View Startup Configuration—Displays the startup configuration in an Action Report.
• View Running Configuration—Displays the current running configuration in an Action Report.
• Save Running Configuration—Saves the current running configuration to the location specified by
the Startup Location attribute. Launches a confirmation dialog box.
Backup/Restore Configuration
The Backup/Restore Configuration area provides the following information:
•
TFTP Host—The IP address or hostname of the TFTP server that the startup or running
configurations were backed up to or restored from.
Note
The TFTP Host field must be configured in order to back up and restore the configuration. The
TFTP Host must be accessible from the managed device, and there must be sufficient disk space
on the host to store the device’s startup configuration.
•
Backup Status—Status of the last backup action. This attribute (read-only) has the following values:
– Ok—The backup completed successfully.
–
Failed—The backup failed.
– Not executed—The backup operation was not executed.
•
Backup File—The name of the file to which the startup configuration will be copied.
Note
If the TFTP server is not the Cisco EMF server, then the file specified by the Backup File field
must already exist. If it does not, the backup action will fail. If the TFTP server is the Cisco EMF
server, the file will be automatically created.