Cisco WS-C3550-12G, Руководство пользователя

Страница: 428 / 436

13-30
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 13 Alarms and Alarm Management
Cisco Catalyst Switch Manager Alarms
All Modules
The following table describes all Module objects state alarms.
Interfaces
The following table describes the Interface objects state alarms.
Note
Because an Ethernet Interface object cannot enter the lostcomms state independent of the corresponding
Ethernet module or supervisor engine module, no alarm is raised when the Ethernet Interface object
enters the lostcomms state.
Table 13-6 All Modules State Alarms
State Description Severity Alarms Cleared
mismatched “C6576M Module is in the mismatched
state. The discovered Supervisor
Module type is different from the
pre-deployed or previously discovered
type.” Major performance
lostcomms
normal “C6576M Module is in the normal
state.” Normal performance
lostcomms
normallostcomms “C6576M Module is in the lostcomms
state. Network connectivity to the
supervisor card is lost.” Normal performance
performance “C6576M Module is in the
performance state.” lostcomms
perflostcomms “C6576M Module is in the lostcomms
state. Network connectivity to the
supervisor card is lost.”
Table 13-7 Interface State Alarms
State Description Severity Alarms Cleared
normal “C6576M Interface is in the normal state.” Normal performance
normallostcomms “C6576M Interface is in the lostcomms state.
Network connectivity to the supervisor card is
lost.” Normal performance
performance “C6576M Interface is in the performance
state.”
perflostcomms “C6576M Interface is in the lostcomms state.
Network connectivity to the supervisor card is
lost.”