Cisco WS-C3550-12G, Руководство пользователя

Страница: 65 / 436

4-5
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 4 Deploying the Cisco Catalyst Switch Manager
Deploying and Commissioning Process Overview
Deploying and Commissioning Process Overview
There are three methods that enable Cisco EMF to monitor a Catalyst switch:
•
IP Auto Discovery
Use this method to deploy a large number of devices that are currently connected to the network.
This method automatically deploys the Network Element and Software objects for each Catalyst
switch discovered.
For detailed information, see the “Deploying Existing Network Objects Using IP Auto Discovery”
section on page 4-6 .
• Manual Deployment
Use this method if a small number of devices that are connected to the network need to be deployed.
This method deploys the Network Element and Software objects for the Catalyst switch specified.
For detailed information, see the “Manually Deploying Network Objects” section on page 4-9 .
•
Predeployment
Use this method to predeploy a device that is not connected to the network. The following objects
can be predeployed:
–
Network Element and Software
– Chassis
–
Supervisor Modules
– Ethernet Modules
–
Switch Fabric Modules
– FlexWAN Modules
–
Port Adapters
– OSM Modules
For detailed information, see the “Predeploying Anticipated Network Objects” section on
page 4-15 .
The remaining Cisco Catalyst Switch Manager objects are automatically discovered when the
Network Element object is commissioned.