8-35
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 8 Interface and Subinterface Management
GE-WAN Interface Management Window
•
In Unicast Pkts.—The number of packets, delivered by this sublayer to a higher (sub-)layer, which
were not addressed to a multicast or broadcast address at this sublayer.
•
Out Unicast Pkts.—The total number of packets that higher-level protocols requested be
transmitted, and which were not addressed to a multicast or broadcast address at this sublayer,
including those that were discarded or not sent.
•
In Packets/Sec—Five-minute exponentially decayed moving average of input packets per second.
•
Out Packets/Sec—Five-minute exponentially decayed moving average of output packets per second.
•
In Bits/Sec—Five-minute exponentially decayed moving average of input bits per second.
•
Out Bits/Sec—Five-minute exponentially decayed moving average of output bits per second.
Error Statistics
The Interface Error Statistics area contains the following information:
•
CRC Error Pkts.—Number of input packets that had cyclic redundancy checksum errors.
•
In Discarded Pkts.—The number of inbound packets that were chosen to be discarded even though
no errors had been detected to prevent their being delivered to a higher-layer protocol. One possible
reason for discarding such a packet is to free up buffer space.
•
Out Discarded Pkts.—The number of outbound packets that were chosen to be discarded even
though no errors had been detected to prevent their being transmitted. One possible reason for
discarding such a packet is to free up buffer space.
•
In Dropped Pkts.—The number of packets dropped because the input queue was full.
•
Out Dropped Pkts.—The number of packets dropped because the output queue was full.
•
In Ignored Pkts.—Number of input packets that were ignored by this interface.
•
In Aborted Pkts.—Number of input packets that were aborted.
•
In Error Pkts.—The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
•
Out Error Pkts.—Number of outbound packets that could not be transmitted because of errors.
Performance Logging
The Performance Logging area contains buttons to enable data logging of all the interface attributes of
the interface:
•
Start—Turns on performance data logging.
•
Stop—Turns off performance data logging.
Note
The logged data is available to you through the Cisco EMF Performance Manager. Refer to the
Cisco Element Management Framework User Guide for more information about the Performance
Manager.
Содержание WS-C3550-12G
Страница 20: ...Contents xx Cisco Catalyst Switch Manager User Guide OL 4930 01 ...
Страница 388: ...11 36 Cisco Catalyst Switch Manager User Guide OL 4930 01 Chapter 11 Routing Management IS IS Management Window ...
Страница 398: ...12 10 Cisco Catalyst Switch Manager User Guide OL 4930 01 Chapter 12 Profile Management Syslog Profile ...
Страница 436: ...A 2 Cisco Catalyst Switch Manager User Guide OL 4930 01 Appendix A Modifying ini Files ...
