manualshive.com logo in svg

Cisco WS-C3550-12G, Руководство пользователя, Страница: 137 / 436

Поделиться
Скачать
Cisco WS-C3550-12G Скачать руководство пользователя страница 137

 

7-25

Cisco Catalyst Switch Manager User Guide

OL-4930-01

Chapter 7      Module and Port Adapter Management

SLB Module Management Window

•

Option (B)

–

A VLAN in the Server Side VLAN field

–

An IP address in the Gateway field

•

Option (C)

–

A VLAN in the Server Side VLAN field

–

An IP address in the Destination Network field

–

A Subnet Mask in the Destination Netmask field

–

An IP address in the Gateway field

Server Farms Tab

The following areas are available on the Server Farms tab of the SLB Module Management window:

•

Server Farm 

•

Server Farm Config 

Server Farm 

The Server Farm area provides the following information:

•

Server Farm Table—Describes the configured server farms. The following attributes are displayed 
for the selected server farm in the table:

–

Server Farm Index—Unique identifier of a server farm on the device.

–

Predictor—Load-balancing predictor algorithm. This attribute can have one of the following 
values: roundrobin (1), leastconns (2), or other (3) (not in write).

Note

A value of other (3) indicates the predictor algorithm is of a type unsupported by the EMS. A 
value of other (3) is not supported for write operations.

•

Real Server Table—Describes the real servers in a server farm. The following columns are displayed 
in the table:

–

Server Farm Name—Unique identifier of a server farm on the device.

–

Real IP Address—IP address of the real server.

–

TCP Port—Optional TCP Port translation for the real server.

–

Current Connections—Number of current connections to the real server.

–

Operation Status—The operational status of the real server. This attribute can have the 
following values: outOfService (1), operational (2), or failed (3).

–

Admin Status—The administrative status of the real server. When the administrative status is 
changed to inService (2), it enables the real server for use by SLB. This attribute can have the 
following values: outOfService (1) or inService (2).

–

Admin Weight—Configured weighting value to use for virtual server predictor algorithm.

–

Current Weight—Actual real server weighting factor.

Содержание WS-C3550-12G





















































































































































































































































































































































































































































Отзывы:

Нет отзывов