Cisco WS-C3550-12G, Руководство пользователя

Страница: 85 / 436

4-25
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 4 Deploying the Cisco Catalyst Switch Manager
Manually Commissioning Network Elements
Manually Commissioning Network Elements
After the Network Element and Software objects are created using the Deployment Wizard, the type of
switch and its contents need to be determined. This determination is made by commissioning the Chassis
object. When the Network Element object is commissioned, it executes a subchassis discovery process
that communicates with the switch to automatically determine the contents of the switch.
Prior to manually commissioning a Network Element, ensure that the EMS and the device are setup to
communicate. For instructions, see the
“Enabling Communication Between Network Elements and
Devices” section on page 4-22 .
To commission the Network Element object, perform the following:
Step 1 Launch the Network Element Management window by performing one of the following:
•
Right–click a Site object within the Network or Physical containment views, then choose
CSM/7600 Manager > NE Config/Mgmt.
• Right–click a Network Element object within the Network or Physical containment views, then
choose NE Config/Mgmt.
The Network Element Management window appears.
Figure 4-6 Network Element Management window