manualshive.com logo in svg

Cisco WS-C3550-12G, Руководство пользователя

Поделиться
Скачать
Cisco WS-C3550-12G Скачать руководство пользователя страница 106

 

6-6

Cisco Catalyst Switch Manager User Guide

OL-4930-01

Chapter 6      Chassis Management

Chassis Management Window

Status 

The Status area provides the following information:

•

Power Supply Table—Indicates the following for each power supply module available within the 
selected chassis:

–

Description—Provides a description of the power supply. This attribute can have the following 
values: Power Supply 1 or Power Supply 2.

–

State—Indicates the current state of the power supply module. This attribute can have the 
following values: Normal or Not Present.

–

Source—Indicates the type of power supply. This attribute can have the following values: ac, 
dc, or unknown.

•

Fan Status—Indicates the following for each fan module available within the selected chassis:

–

Description—Provides a description of the power supply. This attribute can have the following 
values: Power Supply 1 or Power Supply 2.

–

State—Indicates the current state of the power supply module. This attribute can have the 
following values: Other (unknown), Normal, High (minor problem), or Excessive (major 
problem).

Note

If this attribute has a value other than normal, an alarm is generated.

•

Temperature—Provides status of the core of the chassis. This attribute can have the following 
values:

–

Description—Provides a description of the power supply. This attribute can have the following 
values: Power Supply 1 or Power Supply 2.

–

Current Status Value—Current temperature value.

–

Threshold Value—Highest temperature value that the chassis may reach before an automatic 
shutdown occurs.

–

Last Shutdown Value—Indicates the chassis temperature value at the time of the most recent 
device shutdown,

Performance Tab

Note

To collect some of the statistics in the Performance tab, the running configuration of the switch is 
modified to add the following command to each interface: rmon collection stats <n> owner monitor

The Performance tab of the Chassis Management window consists of a single area, Performance 
Logging. The Performance Logging area allows users to turn on performance logging for the chassis 
attributes as well as the attributes of all the chassis elements.

•

Start Performance Logging (Chassis Only) button—Turns performance data logging on the chassis 
object.

•

Start Performance Logging (All Chassis Elements) button—Turns performance data logging on all 
the chassis elements. This includes all chassis performance attributes, all supervisor performance 
attributes and all interface performance attributes.

Содержание WS-C3550-12G





















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды