Cisco WS-C3550-12G, Руководство пользователя

Страница: 97 / 436

5-9
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 5 Network Element Management
Network Element Management Window
–
Notification Layer - Indicates the level at which the SNMP trap client is defined. The level is
one of these values:
• layer2Only—SNMP trap client is defined on the datalink layer only.
•
layer3Only—SNMP trap client is defined on the network layer only.
• layer2And3—SNMP trap client is defined on the datalink and network layers.
Note The IP address of the Cisco EMF server host should be in this list at all times. If it is not, then
Cisco EMF will not receive any traps from the switch or router, which might result in an event
being reported in an untimely fashion or an event being missed.
• Configure—Launches the Chassis Management - Configure SNMP Trap Client window for
modifying the Trap Client list.
Figure 5-3 Chassis Management—Configure SNMP Trap Client Window
The SNMP Trap Client Configure window provides the following:
–
SNMP Trap Client Address—The IP address to which SNMP traps are sent.
– SNMP Trap Client Community String—The community string used within the SNMP trap.
–
SNMP Version—The SNMP version running on the device, snmpv1c or snmpv2.
– Add Client—Adds a client to the client list.
–
Remove Client—Removes the client from the client list.
Note
An error is reported if a nonexistent client is removed or if an existing client is added.