Cisco WS-C3550-12G, Руководство пользователя

Страница: 96 / 436

5-8
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 5 Network Element Management
Network Element Management Window
Cat OS SNMP
Note
The attributes within this area are inactive for IOS devices.
The Cat OS SNMP area provides the following information:
• Same As IOS?—If enabled, the IOS SNMP version and communities will be used to access the
SNMP Agent on the Supervisor module in Hybrid OS configurations.
If this attribute is set to ‘No’ the SNMP Read Community and SNMP Write Community fields in
the Cat OS SNMP area become active.
• SNMP v2c Read Community—The v2c community string used to read data from the agent.
•
SNMP v2c Write Community—The v2c community string used to write data to the agent.
SNMP Trap Tab
The following areas are available on the Configuration tab of the Network Element Management
window:
•
Trap Generation
• SNMP Trap
Trap Generation
The Trap Generation area provides the following information:
•
SNMP Trap Status—Indicates the level at which SNMP traps are enabled. The level is one of these
values:
– disabled
–
layer2Only—SNMP traps are enabled on the datalink layer only.
– layer3Only—SNMP traps are enabled on the network layer only.
–
layer2And3—SNMP traps are enabled on the datalink and network layers.
• Enable—Enables all SNMP trap generation from the switch or router.
•
Disable—Disables all SNMP trap generation from the switch or router.
SNMP Trap
The SNMP Trap area provides the following information:
•
Trap Client IP Table—IP address table to which SNMP traps generated by the switch or router are
sent.
–
Trap Client IP—The IP address to which SNMP traps are sent.
– Client Community—The community string used within the SNMP trap.
– SNMP Version—Version of the SNMP protocol used by Cisco EMF to communicate with the
managed device. This field has the following value: snmpv2c.