Cisco WS-C3550-12G, Руководство пользователя

Страница: 78 / 436

4-18
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 4 Deploying the Cisco Catalyst Switch Manager
Predeploying Anticipated Network Objects
The Deployment Wizard—Summary window closes and the deployed Network Element object(s) appear
in the left-hand pane of the Map Viewer beneath the generic object from which deployment was initiated
and the corresponding icon(s) appear in the right-hand pane of the Map Viewer. The Software and
Chassis objects appear beneath the Network Element object in the left-hand pane of the Map Viewer and
the corresponding icon(s) appear in the right-hand pane of the Map Viewer. The objects deploy in an
unmanaged state (e.g., decommissioned).
Once the predeployed Network Element is available on the network, the chassis object automatically
commissions and initiates subchassis discovery. Subchassis objects appear within the Map Viewer
beneath the Chassis object.
Figure 4-4 Predeployed Catalyst 6509 Chassis Object
After predeploying a Network Element, you may predeploy subchassis modules, as the following section
describes.
If you predeployed the Network Element with the Auto Commission mode, upon contact with the device,
the commissioning process automatically begins.
If you predeployed the Network Element to the Decommissioned state, you may manually initiate
discovery and subchassis discovery to determine the contents of the switch. For instructions on
performing this task, see the
“Manually Commissioning Network Elements” section on page 4-25 .