ABB SafeMove2 Скачать руководство пользователя страница 80

Страница: 80 / 238

The Encapsulate Upper Arm button

The

Encapsulate Upper Arm

button is used to create a geometry that encapsulates

the upper arm. The geometry can then be adapted to fit the needs of the current
application.

Up to two different geometries can be used to create a more accurate encapsulation
of the upper arm.

The Safe Zone button

The

Safe Zone

button is used to create safe zones. The safe zone is displayed in

the graphics window as a rectangular box with vertices.

Description

Button

Creates a default safety zone in the shape of a rectangular box.

Safe Zone

Crates a safe zone by wrapping a part in the RobotStudio station.
The part must first be selected.

Wrapped Safe Zone

After a zone has been created, the next step is to add safety functions to the zone.
This is described in section

The Modify tab on page 84

Tip

It is recommended to change the default name of the safe zone in the

Visual

SafeMove

browser to a name that better corresponds to the current installation.

Settings

The following settings are available in the

Visual SafeMove Properties

browser

after the zone has been created.

Description

Setting

Used to set the priority for overlapping zones. The zone with the
highest priority will set the speed limit for the overlapping space.

•

BASE

- lowest priority.

•

NORMAL

- normal priority.

•

OVERRIDE

- highest priority.

For more information, see

Configure the zones on page 155

Tip

Create a

BASE

zone with a low speed limit that covers the entire

robot cell. This zone is then used to protect the fence. Add

NORMAL

zones for the areas where the robot performs most of the work.
Additionally, add

OVERRIDE

zones for any areas where the robot

is allowed to move fast.

Tool Speed Supervi-
sion Priority

The reference coordinate system in the RobotStudio station.

Note

The base frame cannot be used for reference if it is rotated around
the controller world x or y-axes, for example when using a tilted ro-
bot.

Reference

The height of the zone.

Height

Continues on next page

Application manual - Functional safety and SafeMove2

3HAC052610-001 Revision: P

4 The Visual SafeMove user interface in RobotStudio

4.3.2 Adding SafeMove functions

Continued

Содержание SafeMove2















































































































































































































































Результаты поиска

Содержание SafeMove2

Отзывы:

ABB SafeMove2, Руководство по применению, Страница: 80 / 238

Результаты поиска

Содержание SafeMove2

Отзывы: