ABB SafeMove2 Скачать руководство пользователя страница 131

Страница: 131 / 238

Description

Parts

Zoom out of the diagram.

Zoom Out

Zoom into the diagram.

Zoom In

The zoom level is adjusted so that the TCP is displayed in the
middle of the diagram.

Zoom TCP

Directions of the axes in the selected view.

Coordinate system

The base of the robot.

Robot base

Name and position of the tool encapsulation.

Tool encapsulation

Position of wrist flange in the origin of the tool coordinate
system.

Wrist flange
TCP

Position of the TCP in the tool coordinate system.

Name and position of the safe zone.

Safe zone

TCP coordinates.

Position display

Name of safety controller

Title

Name or coding of the displayed tool.

Tool

Display and hide zones

Each zone can be displayed and hidden individually using the

Zones

button.

Furthermore, with the aid of the following menus, several zones can be displayed
or hidden simultaneously.

•

Display all zones

•

Hide all zones

•

Only display violated zones

Note

If a hidden zone is violated, it is displayed automatically.

Coordinate direction of the wrist flange

The directions of the tool coordinate system are shown on the wrist flange with
lines in the colors red (X-axis), green (Y-axis), and blue (Z-axis).

xx1400001314

Continues on next page

Application manual - Functional safety and SafeMove2

131

3HAC052610-001 Revision: P

5 The FlexPendant user interface

5.3.3 The

Last Zone Violation

tab

Continued

Содержание SafeMove2















































































































































































































































Результаты поиска

Содержание SafeMove2

Отзывы:

ABB SafeMove2, Руководство по применению, Страница: 131 / 238

Результаты поиска

Содержание SafeMove2

Отзывы: