ABB SafeMove2 Скачать руководство пользователя страница 78

Страница: 78 / 238

The Tools group

The

Tools

group contains different tools for analyzing and protecting SafeMove

configurations.

Description

Button

The

Compare

button starts a tool that is used to compare

the differences between two configuration files. This button
provides the following.

•

Compare two configurations

: Compare two selected

configuration files.

•

Compare with RobotStudio configuration

: Compare

the selected configuration file with configuration file
in the RobotStudio user interface.

•

Compare with controller configuration

: Compare the

selected configuration file with the controller configur-
ation file.

Compare

Shows the report for the safety configuration. This button
provides the following options

•

Controller configuration

: Shows the safety configur-

ation report for the current controller configuration.

•

RobotStudio configuration

: Shows the safety config-

uration report for the configuration available in the
RobotStudio user interface.

To show the local safety configuration report, click

Controller

and select

Write to controller

. The local report is shown and

if you do not want to write it to the controller, select

Cancel

Select

Write to controller

to overwrite the controller config-

uration with the RobotStudio configuration.

Show report

The

Protected Elements

button opens the

Protected Ele-

ments

browser.

Protected Elements

From the

Protected Elements

browser it is possible to write-

protect settings in the SafeMove configuration so that the
user cannot change them. The write-protected element are
visualized with a padlock icon in the

Visual SafeMove

browser.
It is also possible to create a basic configuration that can be
used as a template when configuring a new system, see

Protected basic configuration on page 110

Options group

The

Options

group contains display options for the Visual SafeMove user interface.

Description

Checkbox

Displays labels in the graphics window.

Show Labels

Application manual - Functional safety and SafeMove2

3HAC052610-001 Revision: P

4 The Visual SafeMove user interface in RobotStudio

4.3.1 About the

Visual SafeMove

tab

Continued

Содержание SafeMove2















































































































































































































































Результаты поиска

Содержание SafeMove2

Отзывы:

ABB SafeMove2, Руководство по применению, Страница: 78 / 238

Результаты поиска

Содержание SafeMove2

Отзывы: