ABB SafeMove2 Скачать руководство пользователя страница 191

Страница: 191 / 238

7.3 Recovery after safety violation

Recovery after a supervision function has triggered in Automatic mode

When a supervision function triggers and the robot stops, perform the following
to be able to move the robot again.

Speed and stand still violations

Press the motors on button on the robot controller to confirm the violation.

Position and orientation violations

Action

Switch to Manual mode on the robot controller.

Jog the robot back to a position that does not trigger any supervision function.

Recovery after a supervision function has triggered in Manual mode

When a supervision function triggers and the robot stops, perform the following
to be able to move the robot again.

Speed and stand still violations

Release and activate the three-position enabling device on the FlexPendant.

Position and orientation violations

Action

Release and activate the three-position enabling device on the FlexPendant.

Jog the robot back to a position that does not trigger any supervision function.

Recovery from unsynchronized state

Note

Action

This allows the robot to be moved
at reduced speed.

Press the motors on button on the robot controller.

Perform a synchronization.

Application manual - Functional safety and SafeMove2

191

3HAC052610-001 Revision: P

7 Running in production

7.3 Recovery after safety violation

Содержание SafeMove2















































































































































































































































Результаты поиска

Содержание SafeMove2

Отзывы:

ABB SafeMove2, Руководство по применению, Страница: 191 / 238

Результаты поиска

Содержание SafeMove2

Отзывы: