ABB SafeMove2 Скачать руководство пользователя страница 192

Страница: 192 / 238

7.4 Changes to robot or robot cell

Always update safety configuration

If the following is done the safety configuration must be updated and validated
again:

•

A new version of the safety controller software is installed.

Evaluate if the safety configuration needs to be updated

If any of the following is done, the safety responsible person must evaluate if the
safety configuration needs to be updated and validated again:

•

The tool is replaced.

•

Any robot part is replaced.

•

The robot cell is rebuilt in any way.

•

The relation between the world coordinate system and the robot base
coordinate system is changed.

•

The tool coordinate system is changed.

•

Changes to system parameters.

Perform synchronization

If any of the following is done, a new synchronization is required:

•

Revolution counter update

•

Fine calibration

•

Axis calibration

192

Application manual - Functional safety and SafeMove2

3HAC052610-001 Revision: P

7 Running in production

7.4 Changes to robot or robot cell

Содержание SafeMove2















































































































































































































































Результаты поиска

Содержание SafeMove2

Отзывы:

ABB SafeMove2, Руководство по применению, Страница: 192 / 238

Результаты поиска

Содержание SafeMove2

Отзывы: