W6 N 2000 Exklusive Manual Download Page 43

Page: 43 / 220

Changing the presser foot

Changing the presser foot and the presser foot holder

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Changing the presser foot and the presser foot
holder

In this chapter you will find notes regarding the changing of the presser foot
and presser foot holder:

•

Changing the presser foot (Page 43)

•

Exchanging the presser foot holder to mount special accessory feet (to
be purchased at a charge) (Page 46)

6.1

Changing the presser foot

Prerequisite:

•

The correct

‹presser foot›

for the selected pattern is ready for use.

CAUTION

Risk of injury due to an unexpected start-up

The foot controller is on the floor. This can lead to the machine starting up
unexpectedly if the foot controller is activated by, for example, a child, a
sufficiently heavy pet or accidental contact.

►

Always unplug the power plug before replacing the foot controller.

CAUTION

Risk of injury posed by breaking needles

If the incorrect presser foot is used, the needle may strike the presser foot
and thus be bent or broken; parts may move uncontrollably.

►

Always use the correct presser foot.

NOTICE

Material damage arising from selecting the wrong presser
foot

If the incorrect presser foot is used, the needle may strike the presser foot
and thus be bent or broken.

►

Always take care to select the correct needle.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands