W6 N 2000 Exklusive Manual Download Page 169

Page: 169 / 220

Darts: Programs 00 and 01

Practical Tips

169

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

12.1.3

Thread change

First cut the thread at the spool and then pull it out

through the needle

If you want to change the thread, never pull it upwards.

Carry out the following steps:

Cut off the thread above the spool.

Pull the old thread out through the needle.

The old thread has been pulled out

12.2 Darts: Programs 00 and 01

Standard foot, Super-Stretch Needle 90 or

Darts are sewn by means of the

Straight Stitch Central 00

and

Straight Stitch Left 01

patterns. They differ only in terms of the

setting. Therefore, the

straight stitch

central 00

is described in

detail as an example.

Select the following settings

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands