W6 N 2000 Exklusive Manual Download Page 154

Page: 154 / 220

Sewing on buttons: Program 89

Using a Pattern

154

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Turn the hand wheel of the machine a number of times and check wheth-
er the second hole of the button is also entered precisely.

Should this not be the case, readjust the stitch width.

Ensure that the needle does not strike the button during the sewing
process. The needle may break off.

Sew a maximum of 10 stitches at a slow speed.

Lift the presser foot and cut the thread at a length of 10 cm.

10.

Pull the lower thread to bring the upper thread to the left-hand side of the
fabric and knot the threads

The button has been sewn on

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands