W6 N 2000 Exklusive Manual Download Page 63

Page: 63 / 220

Inserting a plastic bobbin in the hook race

What do I do with the lower thread?

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Proceed by holding the

‹plastic bobbin›

with the index finger of the right

hand and guide the thread slowly to the left into the 2nd slot of the hook
race (9 o’clock position)

The thread again slides audibly between the tension springs of the
2nd Slot (9 o’clock position)

Pull the thread up to the end of the thread cutter. It is cut there automat-
ically.

The plastic bobbin has been inserted

W6 Tip

Moreover, W6 WERTARBEIT offers the following options on its website for
free.

Help / W6 N 2000 Exklusive / Videos

: Optimal Threading (approx-

imately 4 minutes’ duration)

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands