W6 N 2000 Exklusive Manual Download Page 7

Page: 7 / 220

Notes for operational safety

Safety notes

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Safety notes

In this chapter you will find information regarding maintenance.

•

Notes for operational safety (Page 7)

•

Instructions for use (Page 8)

•

After sewing (Page 9)

•

Tips for a long-life span (Page 9)

•

What we expect from you (Page 10)

1.1

Notes for operational safety

The machine is carefully designed and safe.

Nevertheless, hazards may arise from the machine.

•

If the machine is not used as intended.

•

If the machine is used for an improper application.

•

If the machine is operated under impermissible conditions.

For this reason, take note of the instructions in the following sections so that
you can work safely and enjoyably.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands